Please use this identifier to cite or link to this item:
Title: Influence of Phases Content on Pt/TiO2, Pd/TiO2 Catalysts for Degradation of 4-Chlorophenol at Room Temperature
Author ID: info:eu-repo/dai/mx/orcid/0000-0001-9953-9142
Abstract: Different Pt/TiO2 and Pd/TiO2 catalysts were prepared by sol-gel method. The influence of different amounts of noble metals (1–5 mol-%) present on the microstructure as well as the photocatalytic property under 4-chlorophenol degradation was evaluated.The anatase phase was favored at low Pt content; however, the apparition of new phases after 3 mol-% (PtO) suggests a saturation lattice considering our solubility limit at 1 mol-%. Similar trend was observed when Pd was added to the TiO2 lattice. The as-prepared catalysts were deeply characterized by X-ray diffraction (XRD) with the Rietveld Method, Raman spectroscopy, high resolution scanning electron microscopy (HRSEM), scanning transmission electron microscopy (STEM), Brunauer-Emmett-Teller (BET) adsorption analysis, and X-Ray photoelectron spectroscopy (XPS). Unit-cell parameter of TiO2 phases varied from 30 to 93 vol-% depending on the amount of Pt or Pd added to the composite. HRTEM and HRSEM identified the phases in the catalysts and confirmed the nanometric size and morphology of the catalysts. An improvement in removal efficiency of 4-chlorophenol was obtained in all the specimens compared with the commercial Degussa P25, which can be explained in terms of phase composition and modification of the band gap.
Issue Date: 7-Aug-2016
Language: eng
Appears in Collections:Artículos

Files in This Item:
File Description SizeFormat 
1805169.pdfInfluence of Phases Content on Pt/TiO2, Pd/TiO2 Catalysts for Degradation of 4-Chlorophenol at Room Temperature6.83 MBAdobe PDFView/Open

Items in RI-UJAT are protected by copyright, with all rights reserved, unless otherwise indicated.